We do have a replacement latch that has been known to work for the older models of the Sears X-Cargo rooftop boxes.
What you need is the Replacement Latch for SportRack Explorer Cargo Box 03347.
I have added a photo a customer sent in showing this replacement latch being used on their X-Cargo box as well. view full answer...
The Replacement Mounting Strap with Buckle for SportRack Explorer Cargo Box # SR02918 should great for your X-Cargo roof box. These straps are 1" wide x 40-3/4" long and many people have used them on X-Cargo carriers. You will want 4 of these straps to give you 2 on each side like originally come with the carrier. view full answer...
The Snap-Loc E-Track Tie-Down Strap # SLLS28CER will be the closest replacement strap we have to the ones that come with the Pack'em Wheel Tie-Down Kit # PK-WTD. This is also a 2" wide strap that connects to the e-track style slots in the chocks. This strap will be 8' long as opposed to the 7' strap with the Pack'em kit. It uses a cam lock style strap to prevent the strap from loosening.
For more tension on the tire the Snap-Loc E-Track Tie-Down Strap # SLLS28RER uses a ratchet handle... view full answer...
The Replacement Tie-Down for Extang Solid Fold 2.0 Hard Tonneau Covers - Qty 1 # EX1024 is what you want for the Solid Fold 2.0. It includes the strap and male buckle, but not the female buckle. If you need that you will want the Replacement Female Tie-Down Buckle for Extang SolidFold 2.0 Tonneau Covers - Qty 1 # EX54560402. I confirmed with my contact at Extang that these are the correct parts for you. view full answer...
The 12' Ratchet Strap # EM59136 you found is the closest we have to the 7-1/2' straps which come with the Erickson ATV E-Track Tie-Down Kit # EM09160. You could cut the strap down to the length you are wanting if it is a problem having the extra length. view full answer...
The BoatBuckle G2 Retractable, Ratchet Transom Tie-Downs # IMF14256 do not have replacement straps available. You will need to replace the entire system.
To keep the new strap from chaffing on the bottom of your boat, I recommend using the BoatBuckle Protective Boat Pads for 2" Wide Tie-Down Straps - Qty 2 # IMF13180 to safeguard your strap from wear and tear. view full answer...
The closest thing to a replacement for the straps that come with the # EM09160 are the Erickson E-Track Strap with Ratchet # EM59136. These are a bit longer at 12' and have a max load of 3,500 lbs with a safe working load limit of 1,165 lbs. The only way to get the 7-1/2' straps is with the full kit. view full answer...
The Quick Fist Tie Down Strap # QF10010 that you referenced is made of transportation grade rubber and has a metal spacer that the bolt slides through so it mounts securely. view full answer...
Since you have a Demco Kar Kaddy 3 the correct replacement wheel tie-down strap is the part # DM03528-81 that you referenced. Price is available at link below. view full answer...
I did some research on a 2007 Ranger Boat Trailer but could not find much information about the spindles, so it is difficult to determine a compatible spindle. In order to determine what type of spindle your trailer has, you can take a few measurements. I have attached an image that shows the measurements to take as well as how to determine the compatible bearings, races and grease seals. If you take these measurements and still need assistance finding the best spindles, please reach back... view full answer...
24 inches would be enough room for the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks # EM58523-09162 to attach. The ratchet would still function just fine but your clearance above the ratchet could be inhabited if the vehicle sits lower and is above the track 24 inches back. view full answer...
Yes, to install the BoatBuckle G2 Retractable, Ratcheting Transom Tie-Down Straps # IMF08893 that you referenced you could simply drill a hole in your trailer frame/channel at the rear of the vehicle to install the straps. This is how it was intended to install. view full answer...
The ProGrip Top-Loader Tie-Down Strap - Double-J Hook - Zinc Bracket - 8' x 1-1/2" - 500 lbs # 317-902500 does not just have the Double-J hook replacement available. I recommend you look at the ProGrip Ratchet Tie-Down Straps - Double-J Hooks - 1-1/2" x 15' - 1,333 lbs - Qty 2 # 317-340720 to get the strap with hooks you need. The hooks are sewn into the straps so they are not available apart from the strap and the 1-1/2 inch width make this the best option for you. view full answer...
We carry the entire strap that includes the J-hooks, part # 3373028819. It's the exact replacement strap for the ratchet tie-downs # 3375480007.
That's the only way to replace the exact J-hook. I contacted Buyers Products and they don't even carry the hook as an individual part. view full answer...
For a winch you will need to choose the right one based on the weight of your boat and the trailer setup. A common ratio for determining your winch load capacity is 2:1.
For example, a 2,200-lb boat generally requires a 1,100-lb winch. If the same boat were winched a short distance with a low incline and with rollers in good condition, it can be safely winched with a 900-lb winch. The boat requires a winch with a 2,200-lb capacity if you are winching a longer distance with more resistance;... view full answer...
To replace the yellow pads on your Boat Buckle Pro Series Ratcheting Transom Tie-Down Straps # IMF18740 referenced in your question, all you need is the Protective Boat Pads # IMF13274. These pads will replace your broken unit so that you can continue to protect your boat from scratches and scuffs.
I have attached a couple short video demonstrations on these products that you can also check out. view full answer...
Yakima changed the design of their SpareRide 2 # Y02599 a while back and now go with the "zip strips". So we no longer carry the rubber straps. We do have the replacement parts for the current design which also fit your older model. You could have just replaced the zip strip # 8880566, but they are no longer available, instead, you can replace the whole SuperCush Anti-Sway Cradle # 8880598. view full answer...
In order to get the hitch ball down to the height you are looking for to use your Demco Kar Kaddy SS # DM9713045 you are going to need a ball mount with an 8" drop. I recommend the Curt Ball Mount for 2" Hitches - 7" Rise, 8" Drop - 9-3/8" Long - 12,000 lbs # C45448. You will also need the # A-90 for a 2" ball.
From what I found about the tires that come with a 2021 Hyundai Elantra Hybrid, you either have a 205/55R16 tire or a 225/45R17 tire. The correct wheel strap for either of this... view full answer...
We do have replacement straps and hardware for your Thule Hull-A-Port Kayak Carrier # TH834. I'm not sure what hardware you are referencing specifically, so I'll just go ahead and list out the replacement hardware and you can choose precisely what you need:
- Replacement Tie-Down Strap # TH39YY
- Replacement Rope # 853-5466
- Replacement Metal Bracket # 853-5513
- Replacement 3-Wing, Low M6 Hand Knob # 753-0783
- (For crossbars up to 9/16" tall) Replacement M6 x 50 Carriage Bolt #... view full answer...
Go To Results